english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
WET-WEATHER CHALLENGE
Water Film Can Obscure the View
Rainwater spreading across the windshield can make the view less clear, including in nighttime rain. Wiper noise can also affect the experience of using the washer system.
|
| Brand Name: | Getsun |
| Model Number: | GT-8043 |
| MOQ: | 2400pcs |
| Payment Terms: | T/T |
| Supply Ability: | 1000000pcs/month |
Apply a water-repellent coating through the vehicle's washer system and wipers, using the formula undiluted.
GETSUN GT-8043 is a 1L windshield washer fluid designed to form a water-repellent film on automotive windshield glass. Add the ready-to-use liquid to a completely drained washer reservoir, then activate the washer spray and wipers. A few wiping cycles help establish the coating effect. The formulation is intended to support clearer wet-weather visibility and help reduce wiper noise.
WET-WEATHER CHALLENGE
Rainwater spreading across the windshield can make the view less clear, including in nighttime rain. Wiper noise can also affect the experience of using the washer system.
PRODUCT FUNCTION
The coating is designed to promote water beading rather than a continuous water film, helping rainwater move off the treated glass.
This rain repellent windshield washer fluid is formulated to create a water-beading effect on the windshield through normal washer spray and wiping.
The supplied directions describe the coating effect forming after a few wiper passes, with 2–3 spray cycles and additional manual wiping recommended for an enhanced effect.
The formula is ready to use. Completely remove the existing washer fluid before filling the reservoir, and do not add water.
The formulation is intended to help reduce wiper noise alongside its water-repellent glass treatment function.
GT-8043 uses the vehicle's washer system to distribute the treatment. Its key application requirements are an empty reservoir, undiluted filling and a clean glass surface. Although the package name includes “Washer Additive,” follow the ready-to-use directions rather than mixing it into another fluid.
| Buyer Check | Confirmed Product Detail |
|---|---|
| Item Identification | GETSUN GT-8043, supplied in a 1L screw-cap bottle. |
| Application Workflow | Remove the old fluid, fill with the formula as supplied, then use washer spray and wipers to distribute it. |
| Glass Condition | Clean stubborn oil film thoroughly before applying the coating treatment. |
Water beading helps reduce the continuous water film associated with a blurred view in rain and nighttime wet conditions.
Once the reservoir and glass are prepared, the coating is applied using the vehicle's washer spray and windshield wipers.
Use this hydrophobic windshield washer fluid on automotive front windshield glass via the washer system. It is intended for drivers seeking a water-repellent glass treatment for rainy conditions, and for automotive-care buyers evaluating a ready-to-use 1L product.
The supplied product description identifies rainy driving at 80–100 km/h as a condition in which water beads slide off the glass rapidly. This is a stated use condition, not a guaranteed result or a recommendation to drive at that speed. Use the wipers as needed and drive according to road conditions and local speed limits.
Follow the sequence below to avoid mixing the formula with other washer products and to prepare the glass for the coating effect.
Completely drain any existing washer fluid. If the windshield has stubborn oil film, clean the glass thoroughly first.
Open the engine hood and locate the washer fluid filler cap. Pour the product directly into the reservoir until full. Do not dilute with water.
Spray the fluid onto the windshield using the vehicle's washer system while the wipers distribute it across the glass.
For an enhanced effect, spray 2–3 times and assist by manually wiping the glass.
Yes. The supplied directions specify a ready-to-use formula: completely drain the old fluid and fill the washer reservoir with GT-8043 without dilution.
No. Do not add water. Remove the existing washer fluid completely before use, because mixing with another product could affect the coating performance.
The vehicle's washer system sprays the liquid onto the glass and the wipers distribute it. The product description states that the coating effect forms after a few wiping cycles.
Clean any stubborn oil film thoroughly before treatment. For an enhanced effect, spray 2–3 times and assist by manually wiping the glass.
Start with the 1L GT-8043 product specification, ready-to-use application method and instructions for your intended market. Ask the product team for packaging information and quotation details for your planned order quantity.
For distributor, importer or automotive-care sourcing enquiries, contact our product team for GT-8043 specifications, packaging information and quotation details.
