english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
Cleaning challenge
Oily deposits on the glass
Rain and wiper movement can make a stubborn film more noticeable across the driver's view.
|
| Brand Name: | Getsun |
| Model Number: | GT-8041 |
| MOQ: | 2400pcs |
| Payment Terms: | T/T |
| Supply Ability: | 1000000pcs/month |
A diluted washer-tank concentrate designed to help lift oily film from automotive windshield glass during normal washer and wiper operation.
GT-8041 is a concentrated liquid for a vehicle's windshield washer system. Its surfactant and solvent blend helps wet, penetrate and emulsify oily deposits on windshield glass. It is intended for the blurred view and wiper noise associated with stubborn oily film, particularly noticeable during rain.
Cleaning challenge
Rain and wiper movement can make a stubborn film more noticeable across the driver's view.
Product approach
Dilute the concentrate, pour the prepared solution into an emptied washer reservoir, then activate the washer jets and wipers.
For a windshield care range addressing oily residue rather than ordinary loose dust alone.
For drivers reporting a blurred view when rain and wipers interact with oily glass.
For a 100 ml concentrate dispensed through a washer reservoir after the specified dilution.
GT-8041 targets oily film with a surfactant-and-solvent cleaning mechanism and a defined 1:15–1:20 concentrate-to-water dilution range.
Designed for stubborn oily dirt on automotive windshield glass.
Surfactants and solvents help penetrate and emulsify the film.
Each GT-8041 bottle contains 100 ml of product and requires dilution before use.
Purified water is recommended. Tap water may cause scale buildup that could clog washer nozzles.
Apply via the car's washer jets and wipers after the reservoir has been emptied of old fluid.
This product is for automotive windshield glass through the vehicle's washer-fluid system.
The washer jets distribute the diluted product while the wipers help remove loosened film. Persistent areas may also be wiped manually.
Use the specified dilution rather than assuming one bottle suits every washer-tank capacity. A 100 ml bottle calls for approximately 1.5–2.0 L of water at a 1:15–1:20 product-to-water ratio.
Drain existing washer fluid to avoid mixing it with the product.
Prepare a 1:15–1:20 mixture with purified water before use; do not apply the concentrate undiluted.
Open the washer-fluid filler cap and add the correctly diluted mixture without overfilling.
Use the car's washer control to send the diluted solution through the washer jets while the wipers move. For stubborn oily film, activate the washer two or three times consecutively and, if needed, wipe the glass manually.
| Product supplied | GETSUN GT-8041, a 100 ml bottled oil-film cleaning concentrate for the windshield washer system. |
|---|---|
| Use planning | Check the reservoir capacity and prepare the stated product-to-water ratio before adding the solution. |
| Problem addressed | Stubborn oily film on automotive windshield glass, with the product delivered through washer jets and wipers. |
Keep in a cool, dry place and out of the reach of children.
Use one part product to 15–20 parts water. For the 100 ml bottle, this corresponds to about 1.5–2.0 L of water.
No universal tank size is specified. Measure the water volume so the final preparation follows the 1:15–1:20 ratio.
Yes. Empty the tank before filling it with the prepared mixture.
Purified water is recommended. Tap water may cause mineral scale that could obstruct the washer nozzles.
Activate the car's washer jets and wipers two or three times consecutively. If needed, manually wipe the windshield glass. The bottle itself is not used as a direct spray.
For GT-8041 specifications and quotation details, contact our product team.
