|
| Brand Name: | Getsun |
| Model Number: | GT-9102 |
| MOQ: | 2400pcs |
| Payment Terms: | T/T |
| Supply Ability: | 1000000pcs/month |
GETSUN GT-9102 500ml windshield oil film remover targets stubborn road residue and water stains. Request specifications and quotation details.
A targeted automotive glass cleaner for oil film, exhaust residue, tree sap, insect residue, water stains and coating residue on windshields, side windows and rear glass.
GETSUN GT-9102 is a 500ml windshield oil film remover designed for stubborn contamination that may remain after routine washing. It targets oil film, exhaust fume residue, tree sap, insect residue, water stains and coating residue on exterior vehicle glass. Correct preparation, circular application, a short working period and thorough rinsing help restore clearer glass and the intended hydrophilic or hydrophobic response of the treated surface.
Buyer challenge
Bonded oil film and mixed road residue can remain visible as a dull layer, especially in rain or under nighttime lighting. A general windshield cleaner may not provide the focused agitation needed for this buildup.
Product solution
Apply the cleaner to a damp sponge or wool applicator, work it evenly in circular motions, allow 30 seconds to 1 minute for penetration, then rinse and dry the glass thoroughly.
Use this treatment when exterior automotive glass shows stubborn contamination that normal rinsing and wiping do not fully remove.
A visible film or diffuse glare from road lighting can indicate oil and exhaust residue on the windshield.
Persistent marks or uneven water behavior may point to deposits or remaining coating material on the glass.
Stubborn organic residue that stays after normal washing may require focused manual application.
This car glass oil film remover combines a broad confirmed residue scope with a clear, repeatable manual process for automotive glass care.
Targets oil film, exhaust fume residue, tree sap, insect residue, water stains and coating residue.
Suitable for exterior windshields, side windows and rear windows when used according to the directions.
A damp sponge or wool applicator supports even coverage and controlled circular cleaning.
The applied product is left on the glass for 30 seconds to 1 minute before rinsing.
The remaining cleaner can be removed with clean water or a pressure washer, followed by microfiber drying.
Removing surface buildup helps restore glass clarity and supports the intended hydrophilic or hydrophobic effect.
The confirmed use scope is exterior car glass. Avoid contact with surrounding paint, plastic, rubber and chrome-plated components.
Application boundary
Do not treat painted panels, plastic trim, rubber seals or chrome-plated parts. If accidental splashing occurs, rinse the affected area immediately with clean water.
The product information is specific enough for distributors, retailers and car-care operators to explain its intended task, working sequence and restrictions without unsupported performance claims.
| Decision factor | GT-9102 solution | Practical buyer benefit |
|---|---|---|
| Residue coverage | Addresses six confirmed types of stubborn glass contamination. | Supports several common exterior-glass cleaning needs with one clearly positioned product. |
| Working control | Uses a damp applicator, circular motion and a 30-second to 1-minute working period. | Gives operators a repeatable process for localized or full-glass treatment. |
| Residue removal | Finishes with a thorough water rinse and clean microfiber drying. | Makes the required aftercare easy to communicate at the point of sale or during service use. |
Removal of stubborn film and residue helps return the treated glass to a clearer visual condition.
Cleaning the film that scatters light can improve visibility during rainy driving and reduce nighttime glare caused by surface contamination.
The same preparation and cleaning sequence can be used across the windshield, side windows and rear glass.
Work on cool glass away from direct sunlight. Keep the product and runoff away from paint, plastic, rubber and chrome-plated parts.
Rinse away sediment and dust with clean water, then wipe the surface dry. If stubborn particles remain, use a clay bar first to reduce scratching risk.
Shake the bottle vigorously. Apply an appropriate amount to a damp sponge or wool applicator.
Spread the product evenly over the glass. Apply additional pressure to heavier oil film, without repeatedly over-scrubbing one area.
Leave the applied cleaner on the glass for 30 seconds to 1 minute.
Remove all product residue with clean water or a pressure washer.
Wipe the glass dry with a clean microfiber cloth to help prevent water spots.
| Format and quantity | 500ml liquid glass cleaner supplied in a handheld trigger bottle. |
|---|---|
| Maintenance role | Focused removal of bonded oil film and other listed residue from exterior vehicle glass. |
| Confirmed use zones | Front windshield, side windows and rear window. |
| Process summary | Prepare, apply with a damp applicator, work in circles, wait briefly, rinse completely and dry. |
Keep the container sealed and store it in a cool place. Keep away from children and pets. The product is not for consumption.
It is intended for stubborn oil film, exhaust fume residue, tree sap, insect residue, water stains and coating residue on automotive glass.
The confirmed application areas are the exterior windshield, side windows and rear window.
After even circular application, allow 30 seconds to 1 minute before rinsing thoroughly.
No. The product is specified for glass use only. Keep it away from paint, plastic, rubber and chrome-plated parts, and rinse accidental splashes immediately.
Rinse the surface thoroughly with clean water or a pressure washer, then dry it with a clean microfiber cloth to help prevent water spots.
For product specifications, packaging information or quotation details, contact our product team about GETSUN GT-9102.
english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
