english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
Buyer challenge
Dull tires reduce the finished look
Tires can look faded or uneven after washing and daily road use, even when the vehicle body is clean.
|
| Brand Name: | Getsun |
| Model Number: | GT-1127 |
| MOQ: | 2400pcs |
| Payment Terms: | T/T |
| Supply Ability: | 1000000pcs/month |
A 550ml aerosol tire-care product that applies as foam to help beautify tires with a deep, rich, long-lasting shine.
This tire shine spray is designed for clean, dry tire surfaces. Its foaming application helps distribute product across the sidewall, leaving a wet-gloss appearance after drying. It is suitable for regular vehicle appearance maintenance where a refreshed tire finish is needed.
Buyer challenge
Tires can look faded or uneven after washing and daily road use, even when the vehicle body is clean.
Product solution
Spray evenly from 4 to 6 inches away, then allow 3 to 5 minutes for drying and wipe away excess product.
Use this tire dressing after cleaning when the sidewall looks dull, faded, or lacks a uniform finish. Apply only to a clean, dry tire surface.
Finish a vehicle wash by treating clean, dry tire sidewalls.
Use when preparing vehicles for showroom, retail, or detailing presentation.
Reapply as needed to maintain the desired tire appearance.
Applies as foam to support even coverage on the tire surface.
Enhances tires with an instant deep, rich, wet-gloss appearance.
Provides a long-lasting shine that helps beautify tires.
Helps prevent cracking, fading, and discoloration.
Spray directly from the can while holding it 4 to 6 inches from the surface.
Allow 3 to 5 minutes to dry; wait 15 minutes before driving for best results.
The product is intended for clean, dry vehicle tire surfaces. Do not allow unabsorbed product to splash onto body panels when tires begin spinning.
| Decision factor | GETSUN solution | Practical buyer benefit |
|---|---|---|
| Application method | 550ml aerosol foam application | A direct spray format for tire-sidewall treatment. |
| Drying guidance | 3 to 5 minutes drying time | Helps standardize the finishing process. |
| Driving guidance | Wait 15 minutes before driving for best results | Helps reduce splashing of unabsorbed product. |
Follow the labeled directions and use only outdoors or in a well-ventilated area.
Shake the aerosol can before use.
Apply only to a clean, dry tire surface.
Hold the can 4 to 6 inches away and spray liberally and evenly.
Wipe off excess product after application.
Allow 3 to 5 minutes for the tire shine foam to dry.
For best results, wait 15 minutes before driving.
| Pack configuration | 550ml aerosol can |
|---|---|
| Intended task | Tire appearance enhancement and wet-gloss finishing |
| Confirmed application scope | Clean, dry vehicle tire surfaces |
| Working method | Shake, spray from 4 to 6 inches, wipe excess, then allow to dry |
Store in a cool, well-ventilated place. Do not expose to temperatures exceeding 50°C / 122°F. Keep out of reach of children.
Apply it to clean, dry vehicle tire surfaces.
Hold the aerosol can 4 to 6 inches away from the tire surface.
Allow 3 to 5 minutes for the product to dry.
For best results, wait 15 minutes before driving.
Yes. Spinning tires may splash unabsorbed product onto body panels, so wipe off excess and allow adequate drying time.
For product specifications, packaging information, or sourcing questions, contact our product team for specifications and quotation details.
