english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
Buyer challenge
Dull tires reduce the finished look
Even after a vehicle wash, clean tire sidewalls can remain faded or visually flat, making the completed vehicle look less polished.
|
| Brand Name: | Getsun |
| Model Number: | GT-1120 |
| MOQ: | 2400pcs |
| Payment Terms: | T/T |
| Supply Ability: | 1000000pcs/month |
A convenient aerosol tire dressing that creates a deep, rich shine while helping protect tire surfaces from cracking, fading, and discoloration.
GETSUN Extreme Foaming Tire Shine Spray is a 550ml aerosol product designed to beautify clean automotive tire surfaces. Its foaming application spreads over the tire sidewall, creating an instant wet-gloss look and a long-lasting shine. The formula also helps prevent cracking, fading, and discoloration as part of regular tire appearance maintenance.
Buyer challenge
Even after a vehicle wash, clean tire sidewalls can remain faded or visually flat, making the completed vehicle look less polished.
Product solution
The aerosol foam applies evenly to a clean surface and develops a deep, rich shine in a simple spray-and-wipe process.
Use this tire dressing after cleaning whenever the tire surface looks dull or when the finished vehicle needs a richer, more uniform appearance.
Apply only to a clean surface so the foam can spread evenly without trapping loose dirt.
Reapply as needed to maintain the desired surface appearance and rich black finish.
Add the product to regular vehicle detailing workflows when clean tires need a more finished look.
The product combines convenient aerosol application, visible foaming coverage, and practical tire appearance benefits.
Enhances clean tires with a deep, rich shine for a visibly refreshed finish.
The foaming format makes it easy to see where product has been sprayed on the sidewall.
Designed to maintain a polished tire appearance beyond the initial application.
Helps prevent cracking, fading, and discoloration during regular tire care.
Apply from 4 to 6 inches away for even coverage across a clean tire surface.
The applied product takes approximately 3 to 5 minutes to dry.
Use the spray on clean automotive tire surfaces where a deep wet-gloss appearance and ongoing surface care are required.
The product is differentiated by its verified application format, working time, and wet-gloss result rather than unsupported performance comparisons.
| Decision factor | GETSUN solution | Practical buyer benefit |
|---|---|---|
| Application visibility | Visible foam spreads across the tire surface during spraying. | Helps users identify covered areas and maintain a more even application. |
| Finish appearance | Produces a deep, rich wet-gloss look on clean tires. | Supports a polished finish after vehicle washing or detailing. |
| Working schedule | Dries in 3 to 5 minutes, with a recommended 15-minute wait before driving. | Provides clear timing for consistent workshop or vehicle-care routines. |
The wet-gloss finish gives clean rubber a deeper and more uniform appearance.
Apply as needed, remove excess product, and allow the surface to dry before the vehicle is driven.
Regular use helps prevent cracking, fading, and discoloration while maintaining surface appearance.
Follow the label directions carefully and keep the product away from heat, sparks, flames, and hot surfaces throughout use.
Make sure the tire surface is clean before application.
Shake the aerosol can thoroughly before spraying.
Hold the can 4 to 6 inches from the tire surface and spray liberally and evenly.
Wipe off any excess product from the treated tire surface.
Leave the applied product for approximately 3 to 5 minutes to dry.
For best results, wait 15 minutes before driving to reduce the chance of unabsorbed product splashing onto body panels.
| Pack configuration | Single 550ml aerosol can for foaming tire care |
|---|---|
| Intended task | Restore a deep wet-gloss appearance while supporting regular tire surface care |
| Confirmed application scope | Clean automotive tire surfaces |
| Working method | Shake, spray evenly from 4 to 6 inches, remove excess, allow 3 to 5 minutes to dry, and wait 15 minutes before driving |
Store in a cool, well-ventilated place. Do not expose the container to temperatures above 50°C/122°F. Keep out of reach of children.
If swallowed, immediately call a poison center or doctor and do not induce vomiting. If inhaled, move the person to fresh air and keep them comfortable for breathing. For skin or hair contact, remove contaminated clothing and rinse with water. For eye contact, rinse cautiously with water for several minutes, remove contact lenses when easy to do, and continue rinsing. Obtain medical advice if irritation persists or if exposed and feeling unwell. Read and use the product in accordance with its Safety Data Sheet.
It gives clean tires a deep, rich wet-gloss appearance.
Yes. The directions specify applying the product to clean surfaces.
Hold the can 4 to 6 inches from the tire surface and spray evenly.
It takes approximately 3 to 5 minutes to dry. For best results, wait 15 minutes before driving.
The aerosol is extremely flammable. Keep it away from ignition sources, use it with suitable ventilation and personal protection, store below 50°C/122°F, and follow the Safety Data Sheet.
For product specifications, packaging information, or sourcing questions, contact our product team for specifications and quotation details.
