english
français
Deutsch
Italiano
Русский
Español
português
Nederlandse
ελληνικά
日本語
한국
العربية
हिन्दी
Türkçe
indonesia
tiếng Việt
ไทย
বাংলা
فارسی
polski
Maintenance challenge
Deposits restrict movement and airflow
Sticky gum, varnish and carbon can collect around throttle plates, choke shafts, linkages and narrow passages, making thorough cleaning difficult.
|
| Brand Name: | Getsun |
| Model Number: | GT-1125 |
| MOQ: | 2400pcs |
| Payment Terms: | T/T |
| Supply Ability: | 1000000pcs/month |
Fast-acting aerosol cleaning for gum, varnish, carbon and corrosive deposits in fuel and air-intake components.
GETSUN 450ml carburetor cleaner acts on gum and varnish deposits, helping remove contamination down to the underlying metal. Its penetrating spray reaches passages and sliding surfaces affected by gum, carbon or corrosive deposits. The formula can be used on carburetor throats, throttle plates and sealing areas, linkages, automatic chokes, PCV valves, manifold heat controls and related passages.
Maintenance challenge
Sticky gum, varnish and carbon can collect around throttle plates, choke shafts, linkages and narrow passages, making thorough cleaning difficult.
Product solution
The carb cleaner spray combines deposit-dissolving action with penetration into hard-to-reach areas. A plastic extension tube can be attached for more precise application.
Use the product when visible gum, varnish, oil or carbon deposits appear on confirmed components and passages. Always follow the label and Safety Data Sheet.
Deposit buildup is visible on the throttle plate, bore or sealing area after the air duct is disconnected.
Gum, carbon or corrosive deposits are present in narrow carburetor passages or around sliding surfaces.
Oil and other deposits interfere with the movement of carburetor linkages or automatic choke mechanisms.
The product is formulated for focused automotive maintenance across several carburetor, choke and throttle-body cleaning tasks.
Acts on gum and varnish deposits to support efficient cleaning of contaminated metal components.
Reaches difficult passages and sliding surfaces that may be bound by gum, carbon or corrosive deposits.
The plastic extension tube supports targeted spraying into small openings and hard-to-reach areas.
Suitable for the confirmed carburetor, throttle-body, choke, linkage, PCV-valve and manifold-control applications.
Stated as safe for oxygen sensors and catalytic converters when used according to the product instructions.
Does not contain chlorinated solvents that can contaminate waste oil.
This carb and choke cleaner supports several targeted maintenance procedures with application methods matched to each component.
The product combines a practical aerosol format with a confirmed application range that supports workshops, maintenance teams and automotive product buyers.
| Decision factor | GETSUN solution | Practical benefit |
|---|---|---|
| Deposit types | Targets gum, varnish, carbon and corrosive deposits. | Supports maintenance of multiple contaminated component areas with one product. |
| Access method | Direct aerosol spray with an attachable plastic extension tube. | Allows broad surface cleaning and more focused application into narrow passages. |
| Compatibility statement | Safe for oxygen sensors and catalytic converters when used as directed. | Fits maintenance procedures involving vehicles equipped with these systems. |
Dissolves and removes stubborn gum and varnish from confirmed metal component areas.
Penetrating action and the extension tube help deliver cleaner into passages and around linkages.
Removing oil and deposits helps free throttle plates, linkages and choke mechanisms.
The following procedure applies specifically to throttle-body cleaning. Keep the engine switched off throughout this process.
Confirm the engine is off before beginning work.
Remove the air duct from the throttle body to expose the throttle plate and bore.
Apply the cleaner to the throttle plate and inside the throttle body.
Open the plate by hand and clean the sealing area.
Use a soft cloth to wipe the cleaned surfaces dry.
Reinstall the air duct securely after cleaning is complete.
Attach the plastic extension tube and remove the air cleaner with the engine off. Spray exposed parts of the carburetor throat. Follow the label instructions for spraying inside the carburetor while the engine is running, adjusting the air-fuel mixture and cleaning the exterior.
Spray the linkage until oil and other deposits disappear.
Remove the air cleaner and spray the choke valve shaft while opening and closing the choke by hand. Follow the label procedure for cleaning the vacuum cylinder, then replace the choke cover and air cleaner.
| Container and fill | Aerosol can with 450ml net content. |
|---|---|
| Cleaning scope | For confirmed carburetor, throttle-body, linkage, choke, PCV-valve and manifold-control maintenance. |
| Deposit coverage | Designed to remove gum, varnish, carbon, oil and corrosive deposits from relevant areas. |
| Working method | Direct spray with an attachable plastic extension tube for targeted access; follow the product label and SDS. |
Store in a cool, well-ventilated place. Do not expose the aerosol can to temperatures above 50°C/122°F. Keep out of reach of children.
Read and use the product in accordance with its Safety Data Sheet. Dispose of the contents and container according to applicable local, regional, national or international regulations.
It is designed to dissolve and remove gum and varnish and to clear carbon, oil and corrosive deposits from confirmed component areas.
Yes. With the engine off, disconnect the air duct, spray the throttle plate and bore, clean the sealing area, wipe dry and reconnect the duct.
The confirmed scope includes carburetor throats and passages, throttle plates, sealing areas, linkages, automatic chokes, PCV valves and manifold heat controls.
The supplied product information states that it is safe for oxygen sensors and catalytic converters when used as directed.
Keep it in a cool, well-ventilated place away from ignition sources and do not expose it to temperatures above 50°C/122°F.
For product specifications, packaging information or sourcing questions, contact our product team for specifications and quotation details.
